Gaskets and Seals at PKW Spare Parts Store
Many commonly used gaskets and seals for use with Portland Kettle Works equipment can be purchased directly here using our online ordering system.
Available gaskets and seals are described below.
Gaskets and Seals
Tri-Clamp GasketsPressure Gaskets
Non-Pressure Gaskets
Tri-Clamp Gaskets
1.5″ (38 mm) Tri-Clamp Gaskets – Pack of 10 Gaskets
Matching gasket for 1.5″ (38 mm) tri-clamp. Pack of 10 gaskets.
- Made from a food grade, 3A approved material with good compression set characteristics.
- It has a lower resistivity to general cleaning chemicals than EPDM or silicone.
- Length: 1.9 inches
- Width: 1.9 inches
- Height: 0.2 inches
- Pack of 10 gaskets
- Shipping Weight: 1 pound
- PKW P/N: S70353
PRICE: $20.00 (Pack of 10)
2″ (51 mm) Tri-Clamp Gaskets – Pack of 10 Gaskets
Matching gasket for 2″ (51 mm) tri-clamp. Pack of 10 gaskets.
- Made from a food grade, 3A approved material with good compression set characteristics.
- It has a lower resistivity to general cleaning chemicals than EPDM or silicone.
- Length: 2.5 inches
- Width: 2.5 inches
- Height: 0.2 inches
- Pack of 10 gaskets
- Shipping weight: 1 pound
- PKW P/N: S70354
PRICE: $20.00 (Pack of 10)
Pressure Gaskets
16″ (406 mm) Round Manway Pressure Gaskets
Make sure your brewery tank’s 16″ (406 mm) top manways are tightly sealed with these sturdy round pressure gaskets.
- Rubber silicon material
- High temperature resistance
- 16” (406 mm) Connection Size
- Applicable for PKW pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 10 inches
- Shipping Width: 13.2 inches
- Shipping Height: 0.75 inches
- Shipping Weight: 2.1 lb.
- PKW P/N: S10395
IMPORTANT NOTE: This is a pressurized manway gasket. Non-pressurized manway gaskets look very similar. If you are not completely certain as to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $22.00
18″ (457 mm) Round Manway Pressure Gaskets
Make sure your brewery tank’s 18″ (457 mm) top manways are tightly sealed with these sturdy round pressure gaskets.
- Rubber silicon material
- 18” (457 mm) Connection Size
- High temperature resistance
- Applicable for PKW pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 12 inches
- Shipping Width: 15.5 inches
- Shipping Height: 0.75 inches
- Shipping Weight: 2.2 lb.
- PKW P/N: S10397
IMPORTANT NOTE: This is a pressurized manway gasket. Non-pressurized manway gaskets look very similar. If you are not completely certain as to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $26.00
20″ (506 mm) Round Manway Pressure Gaskets
Make sure your brewery tank’s 20″ (506 mm) top manways are tightly sealed with these sturdy round pressure gaskets.
- Rubber Silicon material
- High temperature resistance
- 20” (506 mm) Connection size
- Applicable for PKW pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 19 inches
- Shipping Width; 13 inches
- Shipping Height: 0.75 inches
- Shipping Weight: 2.5 pounds
- PKW P/N: S10396
IMPORTANT NOTE: This is a pressurized manway gasket. Non-pressurized manway gaskets look very similar. If you are not completely certain as to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $40.00
24″ (609 mm) Round Manway Pressure Gaskets
Make sure all your PKW brewery tank 24″ (609 mm) top manways are tightly sealed with these sturdy pressure gaskets.
- Rubber silicon material
- 24” (609 mm) Connection Size
- High temperature resistance
- Applicable for PKW 24″ (609 mm) pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 23 inches
- Shipping Width: 13.2 inches
- Shipping Height: 0.75 inches
- 2.5 lbs shipping weight
- PKW P/N: S10407
IMPORTANT NOTE: This is a pressurized manway gasket. Non-pressurized manway gaskets look very similar. If you are not completely certain as to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $50.00
23″ x 19″ (580 mm x 480 mm) Oval Side Manway Pressure Gaskets
Make sure all your PKW brewery tank 23″ x 19″ (580 mm x 480 mm) side manways are tightly sealed with these sturdy oval pressure gaskets.
- Rubber silicon material
- High temperature resistance
- 23” x 19″ (580 mm x 480 mm) connection size
- Applicable for PKW side manways
- Designed to meet to meets today’s sanitary standards in the brewing industry.
- Shipping Lenght: 23”
- Shipping Width: 19”
- Shipping Height: 1”
- 2.5 lbs shipping weight
- PKW P/N: S10408
IMPORTANT NOTE: This is a pressurized manway gasket. Non-pressurized manway gaskets look very similar. If you are not completely certain as to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $60.00
Non-Pressure Gaskets
16″ (406 mm) Round Non-Pressure Gaskets
Make sure your brewery tank’s non-pressurized 16″ (406 mm) top manways are tightly sealed with these sturdy round gaskets.
- Rubber Silicon material
- High temperature resistance
- 16” (406 mm) Connection size
- Applicable for PKW non-pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 10 inches
- Shipping Width: 13.2 inches
- Shipping Height: 2.0 inches
- Shipping Weight: 2.3 pounds
- PKW P/N: S10403
IMPORTANT NOTE: This is a non-pressurized manway gasket. Pressurized manway gaskets look very similar. If you are not completely certain are to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $22.00
18″ (457 mm) Round Non-Pressure Gaskets
Make sure your brewery tank’s non-pressurized 18″ (457 mm) top manways are tightly sealed with these sturdy round gaskets.
- Rubber Silicon material
- High temperature resistance
- 18” (457 mm) Connection size
- Applicable for PKW non-pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 10 inches
- Shipping Width: 13.2 inches
- Shipping Height: 2.0 inches
- Shipping Weight: 2.3 pounds
- PKW P/N: S10404
IMPORTANT NOTE: This is a non-pressurized manway gasket. Pressurized manway gaskets look very similar. If you are not completely certain are to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $26.00
20″ (508 mm) Round Non-Pressure Gaskets
Make sure your brewery tank’s non-pressurized 20″ top manways are tightly sealed with these sturdy round gaskets.
- Rubber Silicon material
- High temperature resistance
- 20” (508 mm) Connection size
- Applicable for PKW non-pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 10 inches
- Shipping Width: 13.2 inches
- Shipping Height: 2.0 inches
- Shipping Weight: 2.3 pounds
- PKW P/N: S10399
IMPORTANT NOTE: This is a non-pressurized manway gasket. Pressurized manway gaskets look very similar. If you are not completely certain are to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $40.00
24″ (609 mm) Round Non-Pressure Gaskets
Make sure your brewery tank’s non-pressurized 24″ (609 mm) top manways are tightly sealed with these sturdy round gaskets.
- Rubber Silicon material
- High temperature resistance
- 24” (609 mm) Connection size
- Applicable for PKW non-pressurized manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 13.2 inches
- Shipping Width: 13.2 inches
- Shipping Height: 2.0 inches
- Shipping Weight: 2.5 pounds
- PKW P/N: S10406
IMPORTANT NOTE: This is a non-pressurized manway gasket. Pressurized manway gaskets look very similar. If you are not completely certain are to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $50.00
16″ x 16″ (406 mm x 406 mm) Square Front Manway Non-Pressure Gaskets
Make sure your brewery tank’s 16″ x 16″ front manways are tightly sealed with these sturdy rectangular non-pressure gaskets.
- Rubber silicon material
- High temperature resistance
- 16” x 16″ (406 mm x 406 mm) connection size
- Applicable for PKW non-pressure side manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 20.5 inches
- Shipping Width: 16 inches
- Shipping Height: 2.0 inches
- Shipping Weight: 2.5 Pounds
- PKW P/N: S10405
IMPORTANT NOTE: This is a non-pressurized manway gasket. Pressurized manway gaskets look very similar. If you are not completely certain are to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $50.00
20″ x 16″ (508 mm x 406 mm) Rectangular Side Manway Non-Pressure Gaskets
Make sure your brewery tank’s 20″ x 16″ side manways are tightly sealed with these sturdy rectangular non-pressure gaskets.
- Rubber silicon material
- High temperature resistance
- 20” x 16″ (508 mm x 406 mm) connection size
- Applicable for PKW non-pressure side manways
- Designed to meet today’s sanitary standards in the brewing industry.
- Shipping Length: 20.5 inches
- Shipping Width: 16 inches
- Shipping Height: 2.0 inches
- Shipping Weight: 2.5 Pounds
- PKW P/N: S10398
IMPORTANT NOTE: This is a non-pressurized manway gasket. Pressurized manway gaskets look very similar. If you are not completely certain are to what type of gasket you need please contact customer service before ordering or installing the gasket. We are not responsible for damage if you use the wrong gasket!
PRICE: $60.00
Click Here to view the PKW spare parts warranty and return policy.
Portland Kettle Works was founded in 2011 in Portland, Oregon USA. We build high-quality stainless steel beverage and brewing equipment. We have built and installed hundreds of state of the art craft breweries worldwide. As a result, our craft brewing clients are among the best of the best. They regularly win beer tasting competitions and they have the gold, silver and bronze medals to prove it. So, if you’re serious about your craft brewing business, contact us so we can help you, too. And if you’re located in Mexico or Latin America, click here to visit our Spanish language site.